HOW TO: MOUNT MAX

You are here:
Estimated reading time: 1 min

There are several mounts available for MAX. Whatever you choose, There are several mounting solution available for MAX. Regardless of the mount you choose be sure you are prepared for the unexpected and lanyard MAX using a 2mm non-cutting line through the lanyard hole on the back. Mount MAX where it is positioned free from being hit by rigging or other gear.

BASIC MOUNT (STANDARD IN THE BOX)
Mount the Basic Mount to your boat, screws not included. To mount MAX, slide MAX into the mount from the side until you hear a click. To unmount, press the lever on the back and slide MAX in the direction of the lever.

FLAT MOUNT & MAST BRACKETS
Mount MAX on your boat with a simple twist, the firm Flat Mount and Mast Brackets are the perfect solution to mounting MAX. To mount, push MAX into the bracket and rotate it clock-wise till it locks. To unmount, first rotate MAX counter-clockwise out of the lock before pulling it out of the bracket. The twist-lock system provides a secure and low profile mounting solution but be sure to not force MAX in or out of the bracket, push-then-twist to mount and twist-then-pull to unmount.

DUAL-LOCK TAPE
Do not place Dual-Lock Tape on the square bracket of MAX as it impairs it’s charging capability. Click here to check how to apply Dual-Lock Tape to mount MAX.

Go to our shop to order a Flat Mount or find (class-specific) Mast Brackets!

Modifying the MAX casing to accommodate a thicker line voids warranty, as well as damage caused by an improper mounting position. If you have questions about how or where to mount MAX, please contact our Customer Support and we are happy to advice!

Was this article helpful?
Dislike 1
Views: 487