Analogue to NMEA 0183 converter for 170kHz B&G transducers (Depth, Speed and Temperature)

Category: .

Analogue to NMEA 0183 converter for 170kHz B&G transducers (Depth, Speed and Temperature)

180.14 ex. VAT

Sailmon Part number: ACTI-DST-2-170

Technical Information

More about Analogue to NMEA 0183 converter for 170kHz B&G transducers

Functionalities:
The DST-2 can be used with new or existing transducers fitted to a vessel, to digitises depth, speed and temperature transducer signals into NMEA 0183 data protocol when matched with the same frequency of the transducer.

Connection:
Screw terminals for the connection of transducer and NMEA 0183 output to E4 NMEA 0183 port. Cable sold separately

Technical Information:
– Supply voltage: 11 – 28 – V

Supply current:
– Supply voltage 12v: 30 – 40 – mA
– Supply voltage 24v: 30 – 40 – mA

NMEA in/out
– Input voltage tolerance (Continuous operation): -15 / +15V
– Differential input voltage (Required level for data to be detected) 2.0 – V
– Output current (RS485 / RS422 compatible) – 10 mA
– Baud rate 4800 – bps
– Data output rate – 1 sec

Depth (Sensor dependent (Configurable Cal))
– Range (narrow beam) – Airmar P66, P79, < 10 knots, ideal conditions 0.3 200 metres
– Range (wide beam)- Airmar DT800, < 10 knots, ideal conditions 0.5 150 metres
– Range (narrow beam) Airmar P66, P79, 10-40 knots, ideal conditions 0.3 100 metres
– Range (wide beam) Airmar DT800, 10-40 knots, ideal conditions 0.5 100 metres

Speed (Sensor dependent (Configurable Cal))
– Range – Airmar P66, DST800, calibrated 5 Hz / knot 0.5 50 knots

Temperature (Sensor dependent (Configurable Cal))
– Range – Airmar, calibrated 10k @ 25 °C -10 50 °C

General
Gland clamping range (Cable diameters accommodated) 4.5 10 mm
Ambient temperature -20 +70 °C

Order information:
SAILMON Part number: ACTI-DST-2-170
RRP exc. VAT: €170.97
RRP inc. VAT: €206.87